BJMVV - F-155 A-COMP F-09P09

Product Identification

Product ID:F-155 A-COMP F-09P09
MSDS Date:10/11/1990
FSC:8010
NIIN:00-104-9702
Kit Part:Y
MSDS Number: BJMVV

Responsible Party
SEAGRAVE COATINGS CORP OF VA
4030 SEAGUARD AVENUE
PORTSMOUTH, VA 23701
US

Emergency Phone: 804-488-4411

Info Phone: 804-488-4411

Cage: 60163

Contractor
SHERWIN-WILLIAMS, SEAGUARD
PORTSMOUTH, VA 23704 US

Telephone: 757-397-2223

Cage: 60163

Ingredients

PAINT ADDITIVE PASTE

Fraction By Weight: 1.0%


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5 - 10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 5 - 10%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192


TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 40%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192


N-BUTYL ALCOHOL (SARA III)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 35%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:INHALATION: IRRITATION TO RESPIRATORY
TRACT, HEADACHE, DIZZINESS AND NAUSEA. SKIN CONTACT: PRIMARY
IRRITATION. EYE CONTACT: PRIMARY IRRITATION.
Effects of Overexposure:INHALATION: IRRITATION TO RESPIRATORY TRACT,
HEADACHE, DIZZINESS AND NAUSEA. SKIN CONTACT: PRIMARY IRRITATION.
EYE CONTACT: PRIMARY IRRITATION.
Medical Cond Aggravated by Exposure:PRE-EXISTING SENSITIVITY TO
SOLVENTS CAN CAUSE A HEIGHTENED REACTION TO EXPOSURE TO THIS
PRODUCT.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR, RESTORE BREATHING. CONSULT A
PHYSICIAN. SKIN CONTACT: FLUSH WITH WATER. EYE CONTACT: FLUSH
IMMEDIATELY WITH LARGE AMOUNTS OF WATER. CONSULT A PHYSICIAN.

Fire Fighting

Flash Point Method:TCC
Flash Point:79 F/26 C
Lower Limits:1.0
Upper Limits:11.2
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, WATER FOG, FOAM.
Fire Fighting Procedures:WATER MAY BE USED TO COOL CLOSED CONTAINERS TO
PREVENT PRESSURE BUILD-UP AND POSSIBLE AUTOIGNITION OR EXPLOSION
WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:WATER MAY BE USED TO COOL CLOSED
CONTAINERS TO PREVENT PRESSURE BUILD-UP AND POSSIBLE AUTOIGNITION
OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:AVOID BREATHING SOLVENT VAPORS. ENSURE
ADEQUATE VENTILATION. AVOID SPARKS, FLAMES AND ANYTHING WHICH COULD
CAUSE FIRE.

Handling

Handling and Storage Precautions:STORE IN A COOL DRY AREA WITH
VENTILATION SUITABLE FOR STORING MATERIALS SHOWN IN THIS MSDS.
Other Precautions:USE PROTECTIVE CREAMS WHERE SKIN CONTACT IS LIKELY.
REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.

Exposure Controls

Respiratory Protection:NIOSH/OSHA APPROVED RESPIRATOR TYPES SUITABLE
FOR MATERIALS, RECOMMENDED. APPROVED CHEMICAL/MECHANICAL FILTERS
RECOMMENDED WHEN VENTILATION IS RESTRICTED. APPROVED AIRLINE TYPE
RESPIRATOR OR HOODS REC OMMENDED IN CONFINED AREAS.
Ventilation:SUFFICIENT VENTILATION, IN VOL/PATTERN TO KEEP AIR
CONTAMINATION BELOW CURRENT APPLICABLE OSHA/ACGIH PERMISSIBLE
LIMITS
Protective Gloves:RECOMMENDED FOR PROLONG/REPEATED CONTACT
Eye Protection:CHEM GOGGLES W/SIDE SHIELDS/FACE SHIELDS
Other Protective Equipment:USE PROTECTIVE CREAMS WHERE SKIN CONTACT IS
LIKELY. REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING. SMOKE IN
DESIGNATED AREAS ONLY.
Supplemental Safety and Health
PROVIDE RESPIRATORY PROTECTION AGAINST FUMES GENERATED DURING BURNING.

Chemical Properties

Boiling Pt:B.P. Text:244 TO 280F
Evaporation Rate & Reference:IS SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK GRAY LIQUID WITH ALCOHOL ODOR.
Percent Volatiles by Volume:54.8

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:PRODUCT IS STABLE UNDER NORMAL CONDITIONS.
AS WITH ANY OTHER ORGANIC MATERIAL, COMBUSTION WILL PRODUCE CO2 &
PROBABLY CO
Hazardous Decomposition Products:OXIDIZING MATERIALS CAN CAUSE A
VIGOROUS REACTION.
Conditions to Avoid Polymerization:WILL NOT OCCUR UNDER NORMAL
CONDITIONS.

Disposal

Waste Disposal Methods:SOAK LIQUID WITH SAWDUST OR RAGS AND REMOVE.
FLUSH WITH WATER IF POSSIBLE. AVOID SKIN CONTACT. DISPOSAL SHOULD
BE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.